LQJW31-001 – LIQUN

Home

>

Drive Shaft

>

Conversion Driveshaft LQJW31-001

As a core component in power transmission systems, our drive shaft assemblies provide a complete and reliable solution for efficient torque delivery. Each shaft is manufactured from high-strength alloy steel tubing and precisely balanced — with residual imbalance controlled within 10 g·cm — ensuring smooth operation even at speeds up to 4000 rpm. From agricultural machinery to construction equipment, we offer fully customized shafts with lengths ranging from 1500 to 3000 mm, along with options such as hardened splines, anti-corrosion coatings, and other specialized surface treatments. Every drive shaft is engineered to perfectly match your equipment requirements for maximum performance and durability.

Vehicle Fitment

CONVERSION DRIVESHAFT SPECIFICATIONS
Car make	Jeep Wrangler
Car model	/
OEM NO	/

Service

Delivery	60 days
Packing	Neutral packing/Custom packing/Liqun packing
Warranty	1 years

Part Interchanges

Cardone NO	/
Dorman NO	/

Complete Power Transmission Solution

Provides a fully assembled system including the shaft tube, universal joints, and spline sleeve — ensuring perfect component compatibility and reliable torque transfer.

Excellent Dynamic Balance

Calibrated using imported balancing equipment, achieving vibration levels 30% lower than industry standards for smoother and quieter operation.

Premium Materials and Craftsmanship

Manufactured from SS-series alloy steel with a yield strength of ≥550 MPa, offering outstanding durability and load-bearing capacity.

Prototype-Friendly, Small Batches Welcome

We fully support new project development and small-lot prototyping — minimum order of just 5 units — helping you validate your design quickly and efficiently.

Better Value for Bulk Orders

With large-scale production capabilities, we offer significant cost advantages and faster delivery for volume orders — special pricing available from 100 units and up.

Regular Inspection

Periodically check for abnormal vibration, noise, or looseness at connection points. Early detection helps prevent system-wide issues.

Lubrication Management

Ensure universal joints and sliding components are properly lubricated using suitable grease to reduce wear and maintain flexibility.

Check Alignment and Balance

Misalignment can cause excessive vibration and accelerated wear. Always verify alignment during installation and maintenance.

Timely Component Replacement

Replace worn joints, bearings, or seals promptly to avoid secondary damage to connected components.

Material Selection

We use high-quality steel materials selected for high strength, fatigue resistance, and excellent machinability.

Precision Machining

Advanced CNC machining ensures accurate dimensions, tight tolerances, and reliable fit between components.

Welding & Assembly

Shaft tubes and yokes are welded using controlled processes to ensure structural integrity and torque capacity.

Dynamic Balancing & Testing

Each drive shaft undergoes dynamic balance testing and functional inspection to ensure smooth operation before shipment.

Avoid Over-Speed and Over-Torque

Operating beyond rated speed or torque limits may result in excessive vibration or structural failure.

Correct Installation Is Essential

Improper installation, incorrect phasing, or misalignment can significantly reduce service life and cause system instability.

Operating Environment Awareness

Avoid prolonged operation in corrosive, high-temperature, or heavily contaminated environments without protective measures.

No Unauthorized Modification

Do not cut, weld, or modify the drive shaft without technical approval. Custom requirements should be discussed with our engineering team.

Conversion Driveshaft LQ1350JLRB

Conversion Driveshaft LQ1350SSP-KGT-885

Faq

Which is more cost-effective: purchasing a complete drive shaft assembly or buying individual universal joints and assembling them ourselves?

Choosing our complete assembly is more economical and reliable. We provide a fully balanced, precision-corrected solution, avoiding potential mismatches and balance issues that can occur with self-assembly. Overall costs are lower, and quality is guaranteed.

Can we provide drawings and have you manufacture the drive shaft for us?

Absolutely. We offer custom manufacturing based on your drawings, whether for prototyping or full-scale production. Once drawings are received, we provide a detailed technical plan and quotation within 2 business days.

How do you ensure the strength of critical drive shaft components?

Strength is ensured through three key measures:
1. Using SS-series high-strength alloy steel;
2. Forging the universal joint yokes;
3. Applying high-frequency quenching to the spline shafts.  These steps together guarantee load-bearing capacity and long service life.

How important is dynamic balancing for drive shafts?

It is critical. 
Drive shafts without precise dynamic balancing can generate severe vibration at high speeds, affecting operational comfort and potentially damaging connected components such as gearboxes and rear axles. Our dynamic balancing precision exceeds industry standards by 30%, effectively protecting the entire transmission system.

What specific benefits do bulk drive shaft orders offer?

For orders of 100 units or more, benefits include:
Price discounts of over 15%;
Lead time reduced to 7–10 business days;
Free dynamic balance testing reports;
Priority production scheduling. Further arrangements can be discussed according to your specific needs.

If you have more specific questions, please feel free to contact us — our team will be happy to provide a tailored solution for your needs.

From large-scale production to tailored parts, LIQUN is here to support your needs.

View Categories

Home

>

Drive Shaft

>

Conversion Driveshaft LQJW31-001

Conversion Driveshaft LQJW31-001

Vehicle Fitment

Service

Part Interchanges

Complete Power Transmission Solution

Provides a fully assembled system including the shaft tube, universal joints, and spline sleeve — ensuring perfect component compatibility and reliable torque transfer.

Excellent Dynamic Balance

Calibrated using imported balancing equipment, achieving vibration levels 30% lower than industry standards for smoother and quieter operation.

Premium Materials and Craftsmanship

Manufactured from SS-series alloy steel with a yield strength of ≥550 MPa, offering outstanding durability and load-bearing capacity.

Prototype-Friendly, Small Batches Welcome

We fully support new project development and small-lot prototyping — minimum order of just 5 units — helping you validate your design quickly and efficiently.

Better Value for Bulk Orders

With large-scale production capabilities, we offer significant cost advantages and faster delivery for volume orders — special pricing available from 100 units and up.

Regular Inspection

Periodically check for abnormal vibration, noise, or looseness at connection points. Early detection helps prevent system-wide issues.

Lubrication Management

Ensure universal joints and sliding components are properly lubricated using suitable grease to reduce wear and maintain flexibility.

Check Alignment and Balance

Misalignment can cause excessive vibration and accelerated wear. Always verify alignment during installation and maintenance.

Timely Component Replacement

Replace worn joints, bearings, or seals promptly to avoid secondary damage to connected components.

Material Selection

We use high-quality steel materials selected for high strength, fatigue resistance, and excellent machinability.

Precision Machining

Advanced CNC machining ensures accurate dimensions, tight tolerances, and reliable fit between components.

Welding & Assembly

Shaft tubes and yokes are welded using controlled processes to ensure structural integrity and torque capacity.

Dynamic Balancing & Testing

Each drive shaft undergoes dynamic balance testing and functional inspection to ensure smooth operation before shipment.

Avoid Over-Speed and Over-Torque

Operating beyond rated speed or torque limits may result in excessive vibration or structural failure.

Correct Installation Is Essential

Improper installation, incorrect phasing, or misalignment can significantly reduce service life and cause system instability.

Operating Environment Awareness

Avoid prolonged operation in corrosive, high-temperature, or heavily contaminated environments without protective measures.

No Unauthorized Modification

Do not cut, weld, or modify the drive shaft without technical approval. Custom requirements should be discussed with our engineering team.

Related Products

Conversion Driveshaft LQ1350JLRB

Conversion Driveshaft LQ1350SSP-KGT-885

Faq

Choosing our complete assembly is more economical and reliable. We provide a fully balanced, precision-corrected solution, avoiding potential mismatches and balance issues that can occur with self-assembly. Overall costs are lower, and quality is guaranteed.

Absolutely. We offer custom manufacturing based on your drawings, whether for prototyping or full-scale production. Once drawings are received, we provide a detailed technical plan and quotation within 2 business days.

Strength is ensured through three key measures: 1. Using SS-series high-strength alloy steel; 2. Forging the universal joint yokes; 3. Applying high-frequency quenching to the spline shafts. These steps together guarantee load-bearing capacity and long service life.

For orders of 100 units or more, benefits include: Price discounts of over 15%; Lead time reduced to 7–10 business days; Free dynamic balance testing reports; Priority production scheduling. Further arrangements can be discussed according to your specific needs.

From large-scale production to tailored parts, LIQUN is here to support your needs.

View Categories

About Us

Products

Search for products

About Us

About Us

Products

Search for products

Products

Absolutely. We offer custom manufacturing based on your drawings, whether for prototyping or full-scale production. Once drawings are received, we provide a detailed technical plan and quotation within 2 business days.

Strength is ensured through three key measures:
1. Using SS-series high-strength alloy steel;
2. Forging the universal joint yokes;
3. Applying high-frequency quenching to the spline shafts.  These steps together guarantee load-bearing capacity and long service life.

For orders of 100 units or more, benefits include:
Price discounts of over 15%;
Lead time reduced to 7–10 business days;
Free dynamic balance testing reports;
Priority production scheduling. Further arrangements can be discussed according to your specific needs.